全國統一熱線：021-32205893
MN28系列電磁閥,MADAS自動電磁閥
MADAS自動電磁閥 P.MAX 8 BAR
馬達斯MADAS自動電磁閥（在張力下打開，關閉時）不適合檢測瓦斯油。
MN28系列電磁閥設計在zui惡劣的工作條件下非常可靠。 它有一個很大的通道，所以低負載損失。 其特殊結構不會因?yàn)樯嫌螇毫?qiáng)或下游壓力下降而引起針刺。
其結構非常好，采用壓鑄鋁結構，玻璃密封器具和所有部件直接接觸流體，由黃銅和不銹鋼制成。
如果與其他膜伺服控制型號相比，MN28電磁閥即使在環路電路中也能停止工作，差壓上下游壓力為0至8 bar。
開啟和關閉速度允許使用需要流體劑量的Madas電磁閥。
MN28
P.MAX 8 BAR
Automatic solenoid valve (it opens when under tension and closes without) suitable to detect gas oil.
The MN28 series solenoid valve is conceived to be very reliable in the hardest working conditions. It has a large section of passage and so a low load loss. Its particular construction doesn’t permit pin stick due to either strong upstream pressure or strong downstream depression.
Its construction is very good with a die-cast aluminium structure, viton seal organs and all parts in direct contact with fluid, made of brass and stainless steel.
If compared to other membrane servo-controlled models the MN28 solenoid valves can work non stop even in ring circuits with differential upstream and downstream pressure from 0 to 8 bar.
The opening and closing rapidity permits to use the Madas solenoid valves where a precise fluid dosage is needed.
In conformity with:
2014/68/EU PED Directive
(ex 97/23/EC)
2014/30/EU EMC Directive
(ex 2004/108/EC)
2014/35/EU LVD Directive
(ex 2006/95/EC)
MN28系列電磁閥,MADAS自動電磁閥
MN28系列電磁閥,MADAS自動電磁閥
|
||
|
||
 |
會員_a.png)