全國統一熱線：021-32205893
BURKERT電磁閥-2/2路電磁閥產品優點
德國BURKERT寶德2/2路電磁閥低
高溫
交付了2610型直動式閥門
電路功能常閉。熱量
通過手段隔離線圈和外殼
不銹鋼波紋管允許
中等溫度。這樣凝結
或線圈的不可接受的升溫
避免。附帶的電纜頭包含一個
“踢和放”電子支持
開放階段和之后的減少
打開控股權。
電路功能A
2/2路直動式電磁閥，
通常關閉
BURKERT電磁閥-2/2路電磁閥產品優點
BURKERT電磁閥其他技術規格
直徑
[mm]的
Kv值
水[m3 / h]
連接
范圍
壓力[bar]
功耗響應時間
呼叫[W]保持[W]打開
[MS]
關閉
[MS]
6.0 0.8 G 1/4，NPT 1/4 0-10 72 4 100至200 300至500
8.0 0.9 G 1/2，NPT 1/2 0-10
12.0 1.8 G 1/2，NPT 1/2 0-3.5
流量：Kv值水[m3 / h]
在+ 20°C，排氣口入口和出口處測量壓力為1 bar
壓力值[bar]
與大氣壓力相關的超壓
有時間了
響應[毫秒]
在6巴和+ 20°C時測量水流量
開盤
關閉
壓力從0上升到90％，
壓力從100降至10％
The depiction of the products may differ from the actual specific design.
The 2610 valve is a direct-acting, media-separated plunger valve. Thermal and hermetic isolation of coil and housing by means of a stainless steel bellows enables both extreme media temperatures and aggressive media. The coils are moulded with chemically resistant epoxy. Therefore, the valve is especially well suited for applications with critical media. The cable plug with 'Kick and Drop' electronics included in the scope of supply supports the valve opening process and reduces current to the holding power after opening. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65 – in combination with the stainless steel housing NEMA 4X.
For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.
BURKERT電磁閥-2/2路電磁閥產品優點
|
||
|
||
 |
